The SSXL-XP01 tethered power supply system can be adapted to multi-UAV platforms,

inclucing DJI M200/M210, Inspire 2, M300/M350, as well as UAVs that support 6S or 12S

power supply within 2500W. Just replace and use the airborne module that adapts to

different UAVs. The system consists of an airborne module and a ground integrated power

supply box. The electrical energy is transmitted from the ground to the airborne module on

the drone through the high-performance alloy power supply line, and converted into the

DC 6S/12S voltage used by the drone, which can continuously power the drone. It can be

directly  connected  to  generators  or  220V  mains  power,  allowing  drones  to  perform

ultra-long endurance operations on a safe basis. At the same time, the airborne terminal

module provides a 48V/24V power interface (automatically switching between battery and

power supply), which can be used by other airborne devices, such as mounting floodlights

to  realize emergency  lighting at  night,  mounting  relays to  restore communication or

extend communication distance, mount the camera gimbal to achieve long-term monitor-

ing, etc.

 

The tethered system perfectly solves the three limitations of multi-rotor industrial

drones:

▶ Flight Time ⸺ After being connected to the tethered platform, the multi-rotor

drone can complete fixed-point  high-altitude  hovering  missions that  require

long-term continuous operations in specific scenarios without being limited by

battery capacity.

▶ Safety⸺In  special  areas  such  as  no-fly  zones,  crowds,  flammable  and

explosive areas, tethered drones can maximize the performance of tasks while

minimizing the danger.

▶ Ease of Use⸺Only need to master simple flying skills to easily operate the tethered drone.

▶ Supports high-power loads⸺A high-power output interface is reserved on the airborne module, so the drone can hang higher-power loads.

 

| Features

▶ Aluminum alloy shell, small size, light weight, less than 14kg.

▶ Simple operation, press to start high voltage output, and press to automatically take up the cable.

▶ No need to modify the aircraft, just install the airborne module directly and use it.

▶ Shell color and panel language support batch customization.

▶ Optical fiber communication can be customized.

▶ Two modes of transport are available: backpack or trailer.

 

Tethered Power Station Specs

Cable Length	50m / 100m
Cable Winch	Auto+Manual
Dimensions	422×350×225mm
Weight	13.4kg
Rated Power	3000w.
Input Interface	AC 220V
Working Temp	20℃~+55℃
Hovering Time	＞ 12h
Interface	Type-C, USB, Ethernet Port (customized)